Factors to Consider When Customizing Lithium Battery Packs

Lithium battery packs are widely used in electric vehicles, industrial equipment, robotics, medical devices, marine applications, energy storage systems, and other electronic equipment.

Different applications require different battery specifications. A suitable lithium battery pack design needs to consider electrical performance, mechanical structure, safety requirements, operating environment, and production requirements.

When working with a lithium battery manufacturer for a custom battery pack project, understanding the key design factors can help improve product compatibility and reduce development time.

1. Define the Battery Application Requirements

The first step in lithium battery customization is understanding the application scenario.

Different devices have different requirements for battery performance.

예를 들어

• Electric bicycles and electric motorcycles require suitable energy capacity, lightweight design, and weather resistance.
• AGV and AMR robots require stable power output, long cycle life, and communication functions.
• Medical equipment requires reliable operation and safety compliance.
• Agricultural drones require lightweight design and suitable discharge performance.
• Energy storage systems require long-term operation and stable charging and discharging performance.

Before designing a battery pack, manufacturers usually need information about:

• Equipment type
• Working conditions
• 운영 시간
• 로드 요구 사항
• 설치 공간
• 환경 조건

A clear application definition helps determine the appropriate battery solution.

2. Select the Appropriate Battery Voltage

Voltage is one of the basic parameters of a lithium battery pack.

The battery voltage must match the electrical system of the equipment.

Common lithium battery pack voltages include:

• 12V
• 24V
• 36V
• 48V
• 60V
• 72V

예를 들어

A 48V electric vehicle battery pack commonly uses a 13-series lithium battery configuration, with a fully charged voltage of approximately 54.6V.

When selecting voltage, manufacturers need to confirm:

• Device rated voltage
• Controller voltage range
• Motor requirements
• Charger specifications
• BMS 구성

Incorrect voltage selection may affect equipment operation and battery performance.

3. Determine Battery Capacity and Energy Requirements

Battery capacity directly affects operating time.

Capacity is usually measured in Ah (Ampere-hour), while total energy is measured in Wh (Watt-hour).

The calculation formula is:

에너지(Wh) = 전압(V) × 용량(Ah)

예를 들어

A 48V 20Ah battery pack:

48V × 20Ah = 960Wh

The required capacity depends on:

• Expected operating time
• Equipment power consumption
• Load conditions
• 충전 빈도
• Available installation space

A battery pack design should balance capacity, size, and weight according to the application.

4. Choose the Right Battery Cell Type

Battery cells are an important part of a lithium battery pack.

Different cell chemistries provide different characteristics.

Lithium-ion NMC Battery Cells

NMC (Nickel Manganese Cobalt) cells are commonly used in applications requiring higher energy density.

일반적인 애플리케이션은 다음과 같습니다:

• 전동 자전거
• 전기 오토바이
• 휴대용 장비
• Lightweight devices

LiFePO4 배터리 셀

Lithium iron phosphate (LiFePO4) cells are widely used in applications requiring stable operation and long cycle life.

일반적인 애플리케이션은 다음과 같습니다:

• 산업 장비
• AGV 및 AMR 로봇
• 선박용 배터리
• 에너지 저장 시스템

Lithium Polymer Battery Cells

Lithium polymer cells offer flexible shape designs and are often used in applications with limited space.

일반적인 애플리케이션은 다음과 같습니다:

• 드론
• Portable electronics

The selection of battery cells should consider energy requirements, safety, operating environment, and product design.

5. Design the Battery Management System (BMS)

The Battery Management System (BMS) controls and monitors lithium battery operation.

A properly configured BMS can provide protection functions and battery monitoring.

Common BMS functions include:

• 과충전 방지
• 과방전 방지
• 과전류 보호
• 단락 보호
• 온도 모니터링
• Cell voltage monitoring
• State of charge (SOC) calculation

For intelligent applications, the battery pack may require communication functions:

• CAN 버스
• RS485
• UART
• Modbus 통신

For industrial robots, electric vehicles, and smart devices, BMS communication can help integrate the battery with the equipment control system.

6. Consider Battery Pack Structure and Size

The mechanical design of a battery pack needs to match the equipment installation space.

Important design factors include:

• 배터리 치수
• Mounting method
• Housing material
• 커넥터 위치
• Cable routing
• 방열 설계

Common battery pack structures include:

• Plastic housing
• Aluminum housing
• Metal enclosure
• Waterproof sealed design

For e-bike applications, customized designs may include:

• Down tube batteries
• 후면 랙 배터리
• 시트 튜브 배터리
• Integrated frame batteries

A suitable structure helps improve installation compatibility and product reliability.

7. Evaluate Charging and Discharging Requirements

Charging and discharging performance should match the equipment operating conditions.

주요 매개변수로는 다음이 있습니다:

• 연속 방전 전류
• 최대 방전 전류
• 충전 전류
• Charging time requirements

Different applications have different power demands.

예를 들어

• Electric vehicles may require higher current output during acceleration.
• Robots may require stable current supply during continuous operation.
• Drones may require suitable discharge performance during flight.

Battery design should consider both normal operation and peak load conditions.

8. Consider Operating Temperature Conditions

Temperature affects lithium battery performance and service life.

Battery customization should consider:

• Working temperature range
• Charging temperature range
• Storage temperature range

For outdoor or industrial applications, additional designs may be required:

• Thermal insulation
• Heating system
• 온도 모니터링
• Special BMS settings

Understanding the operating environment helps select suitable battery materials and protection solutions.

9. Battery Safety Certifications and Regulations

Different markets have different requirements for lithium battery products.

Common certifications and standards include:

• UN38.3 for transportation testing
• IEC 62133-2 for battery safety
• CE for European market requirements
• UL2271 for light electric vehicle battery applications
• FCC for electronic equipment
• RoHS for environmental requirements

For international projects, certification requirements should be considered during the early design stage.

This helps avoid redesign costs after product development.

10. Waterproof and Protection Requirements

Many lithium battery packs are used in outdoor environments.

Depending on the application, the battery enclosure may require protection against:

• 먼지
• Water
• 수분
• 진동
• Mechanical impact

Common protection ratings include:

• IP65
• IP67
• IP68

For applications such as electric motorcycles, marine equipment, and outdoor robots, enclosure protection is an important design factor.

11. Battery Testing and Quality Control

A complete battery manufacturing process includes multiple testing procedures.

Typical quality control steps include:

• 반입 셀 검사
• Cell voltage and resistance sorting
• 용접 검사
• BMS testing
• Charging and discharging testing
• 에이징 테스트
• 최종 검사

Battery consistency is important for pack performance and long-term operation.

Professional battery manufacturers usually perform verification tests before mass production.

12. Select a Suitable OEM Lithium Battery Manufacturer

Choosing the right manufacturing partner is an important part of custom battery development.

A suitable OEM battery manufacturer should have experience in:

• 배터리 팩 설계
• 세포 선택
• BMS integration
• Structural engineering
• 프로토타입 개발
• 인증 지원
• Mass production

The manufacturer should be able to provide technical support from initial design to final production.

Information Required for Custom Lithium Battery Pack Development

Before starting a custom battery project, customers usually need to provide:

결론

Custom lithium battery pack development requires consideration of multiple factors, including application requirements, voltage, capacity, battery cells, BMS design, mechanical structure, safety standards, and manufacturing capability.

A well-designed battery solution should match the equipment requirements and operating environment while meeting safety and quality requirements.

Working with an experienced lithium battery OEM manufacturer can help companies develop battery packs suitable for different applications, from electric mobility and industrial robots to medical devices and energy storage systems.

자주 묻는 질문 

What information is needed for a custom lithium battery pack?

Customers usually need to provide application details, voltage, capacity, dimensions, current requirements, operating environment, and certification requirements.

How long does it take to develop a custom battery pack?

Development time depends on battery complexity, testing requirements, and certification needs. Prototype development usually includes design, sample production, and performance verification.

What battery cells can be used for custom battery packs?

Common options include NMC lithium-ion cells, LiFePO4 cells, and lithium polymer cells. The selection depends on application requirements.

Why is BMS important for lithium battery packs?

BMS monitors battery conditions and provides protection functions such as overcharge, over-discharge, over-current, and temperature protection.